User Tools

Site Tools


howto:dji_configs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
howto:dji_configs [2018/12/23 11:20]
computerstar2000 [DJI Configs Files]
howto:dji_configs [2018/12/23 11:21] (current)
computerstar2000 [Is FCC mod working? How to check?]
Line 44: Line 44:
 ===== Is FCC mod working? How to check? ==== ===== Is FCC mod working? How to check? ====
  
-Hi all guys. 
 To make some clarity about the FCC argument and to verify if it is working, as the wide confusion surrounding the subject, I wanted to tell you that **the FCC mod using the .DJI.configs** (take care: put the **dot DJI dot configs** file in the right folder **\Android\data\dji.go.v4\files**)** works**, it doesn'​t matter of the number of WIFI CHANNELS shown by the application. To make some clarity about the FCC argument and to verify if it is working, as the wide confusion surrounding the subject, I wanted to tell you that **the FCC mod using the .DJI.configs** (take care: put the **dot DJI dot configs** file in the right folder **\Android\data\dji.go.v4\files**)** works**, it doesn'​t matter of the number of WIFI CHANNELS shown by the application.
 In a nutshell, to avoid misunderstanding,​ FILE insertion will enable FCC mode even if you are in a non-FCC area.  In a nutshell, to avoid misunderstanding,​ FILE insertion will enable FCC mode even if you are in a non-FCC area. 
Line 51: Line 50:
 The only way to test the FCC mode is to measure transmit power with a dedicated tool, or, as I did, fly two drones, mavic in my case, in the same place at the same time and in the same configurations,​ with the only difference in the presence of the .DJI.configs file in one of the two drones. ​ The only way to test the FCC mode is to measure transmit power with a dedicated tool, or, as I did, fly two drones, mavic in my case, in the same place at the same time and in the same configurations,​ with the only difference in the presence of the .DJI.configs file in one of the two drones. ​
 Well, one mavic at a distance of about 3800 meters had WEAK SIGNAL and activated the automatic RTH, the other, continued to fly and at a distance of about 4500 meters it had 4 receive notches on the total of 5 in both the controller and in HD. (test stopped because no need to go further) Well, one mavic at a distance of about 3800 meters had WEAK SIGNAL and activated the automatic RTH, the other, continued to fly and at a distance of about 4500 meters it had 4 receive notches on the total of 5 in both the controller and in HD. (test stopped because no need to go further)
- 
- 
-**UPDATE!!!! 
-**It seems that .DJI.configs file is working until  DJI GO V4 4.1.12 (iOS version) and DJI GO V4 4.1.10. 
-With newer versions ​ the .DJI.configs file seem that it is not working.**** 
  
 Here the REAL test showing that .DJI.configs is really working (**thanks to @GabrieleFK14** for hardware testing) Here the REAL test showing that .DJI.configs is really working (**thanks to @GabrieleFK14** for hardware testing)
howto/dji_configs.txt · Last modified: 2018/12/23 11:21 by computerstar2000