User Tools

Site Tools


howto:mavic_gps_disconnected_compass_wont_calibrate_fix

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
howto:mavic_gps_disconnected_compass_wont_calibrate_fix [2018/08/12 10:09]
aciid added creds for helping
howto:mavic_gps_disconnected_compass_wont_calibrate_fix [2018/08/12 19:37] (current)
aciid added pictures
Line 8: Line 8:
  
 With your GPS board now facing you take a picture of the wire's color/pin ordering.  With your GPS board now facing you take a picture of the wire's color/pin ordering. 
 +
 +{{:howto:gps1.png?200|}}
  
 Scrape off the white goo with nylon chisel tips and remove any remaining goo with a soldering iron at 300'C. Scrape off the white goo with nylon chisel tips and remove any remaining goo with a soldering iron at 300'C.
Line 14: Line 16:
  
 You should end up with something like this. You should end up with something like this.
 +
 +{{:howto:gps2.png?200|}}
  
 Rework the wires with your fingernails or a craftpen, they are really too thin to strip with tools. Apply a thin coat of solder to the tips to make it easier to attach them back to the pads. Then just solder wires back to pads.   Rework the wires with your fingernails or a craftpen, they are really too thin to strip with tools. Apply a thin coat of solder to the tips to make it easier to attach them back to the pads. Then just solder wires back to pads.  
howto/mavic_gps_disconnected_compass_wont_calibrate_fix.1534068581.txt.gz ยท Last modified: 2018/08/12 10:09 by aciid